11  LIBRARY ITEMS: 11, STAFF, POS,  VERT. NOTE NUM, P5)ITEM NUM, 
 
	   P6)HORZ. SZ., P7)VERT. SZ.,   P8,  P9,  P10
 
     P5 MAY HAVE NUMBERS 0 THROUGH 99.  NUMBERS 0-9 REFER TO
	THE "BASIC" DRAW FILE.  (SEE 'DRAW.MAN' FOR PREPARATION
	OF 'DRAW' FILES.)  THE "BASIC" FILE SHOULD HAVE A NAME
	WITH 4 LETTERS AND THE NUMBER 0 ON THE END.  IF THE "BASIC"
	NAME IS 'CHAR0' THEN NUMBERS 10 THROUGH 19 WOULD REFER
	TO 'CHAR1'; 20-29 TO 'CHAR2', 30-39 TO 'CHAR3', ETC.
 
     P8  = -1 FOR FILL ON CRT, =-2 FOR NO FILL ANYWHERE.
	IF P8 IS GREATER THAN 0 LINE DRAWINGS WILL BE 'THICKENED'.
	P8=.1 THICKENS ONE VERTICAL STEP NO MATTER WHAT THE SIZE FACTOR.
	P8= 1 UP TO 99 WILL THICKEN VERTICALLY PLUS 1 TO 99 LINES.
	P8= 100 UP TO 9900 WILL THICKEN HORIZONTALLY.
	P8=305, FOR EXAMPLE WILL THICKEN PLUS 3 LINES HORIZONTALLY AND
	   5 LINES VERTICALLY.
		(NOTE: WHEN PRINTING LARGER SIZES THE THICKNESS WILL
		 INCREASES PROPORTIONATELY.)
     P9 = CLOCKWISE ROTATION BY DEGREES.
 	
	IF P10 IS SET TO 1 A "BASIC" FILE NAME WILL BE REQUESTED.
	THE NAME WILL BE STORED IN P10. ANY TIME P10 IS SET TO 1
	THE NAME WILL BE RE-REQUESTED.  ANY TIME P10 IS IGNORED THE
	LAST NAME GIVEN WILL BE PUT INTO P10.
	THUS SEVERAL ITEMS CAN USE DIFFERENT "BASIC" NAMES.